Slipway provide a paper template in their instruction book which I guess you are meant to cut out and use to mark the prop shaft hole on the left side of the GRP hull, then turn over and mark out the right side.
I want to keep the instruction book intact, so a quick visit to Staples and two photocopies, (one mirror image), was the order of the day.
IT'S A FACE!
After cutting out I've positioned and stuck the templates on the hull using a quick spurt of Photomount. I also made a few extra extended marks for reference on the prop shaft holes since these will be slightly larger to account for the prop shaft sleeve mentioned earlier.
I want to keep the instruction book intact, so a quick visit to Staples and two photocopies, (one mirror image), was the order of the day.
IT'S A FACE!
After cutting out I've positioned and stuck the templates on the hull using a quick spurt of Photomount. I also made a few extra extended marks for reference on the prop shaft holes since these will be slightly larger to account for the prop shaft sleeve mentioned earlier.
No comments:
Post a Comment